Instrument Cluster - New Holland L213 Operator's Manual

Instrument cluster

Menu navigation controls
Use the four switch buttons to navigate through the instru-
ment cluster Menu by following the setup menu functions.
Many of the setup menu functions are intended for ser-
vice technicians and owners. Contact your dealer for the
service manual or security code information.
(1) TEXT DISPLAY
Displays the menu text.
(2) START
Navigates selections on every menu level.
Certain menus will prompt the user to enter an access
code or allow the user to change a numerical value.
NOTE: Pushing the Start button will increment the flash-
ing digit 1,2,3 for number entry.
(3) OPERATE
Increments the flashing digit 7,8,9,0 for number entry.
(4) AUX OVERRIDE :
Exits the sub-menu and moves top level to the next
option.
Increments the flashing digit 4,5,6 for number entry.
(5) POWER
For number entry, moves flashing digit to the next place.
Saves entry.
Enters the sub-menu.
Top level menu options
• EXIT — Exit the setup menu.
• EH — Customize the speed of the machine's Electro
hydraulic controls (if equipped).
• dSPLY — Alternate method to select between the se-
lected display parameters.
• UNITS — Allows the operator to select Fahrenheit (Im-
perial units) or Celsius (Standard Imperial units).
• JTIME — Job timer. Timer that displays engine operat-
ing hours since last reset. Ideal for rentals or job track-
ing.
• LOCK — Used to create/change owner and user codes
3 - CONTROLS AND INSTRUMENTS
NOTE: The Advanced Instrument Cluster (AIC) images
are shown in this section for the four switch buttons (2),
(3), (4) and (5) used to navigate through the instrument
cluster. The top two switch buttons on the Electronic In-
strument Cluster (EIC) are function buttons and function
the same as the POWER (5) and START (2) switch but-
tons on the AIC instrument panel for the setup menu func-
tions.
3-49
1
RAIL15SSL0143CA