New Holland L213 Operator's Manual page 259

ITEM
R
Clearance circle radius without tool
S Clearance circle radius with 1676.4 mm (66.0 in) DF
bucket
S Clearance circle radius with 1676.4 mm (66.0 in) LP
bucket
S Clearance circle radius with 1676.4 mm (66.0 in) LPE
bucket
T Clearance circle radius rear
V Over the tire width
W Overall width
Operating weight
SAE Rated Operating Capacity (ROC)
Tipping load
Counter weight (optional)
Cab side glass (optional)
Cab glass door (optional)
Cab Lexan door (optional)
Suspension seat (optional)
NOTE: Measurements are based on machines with 10 x 16.5 tires and a 1676.4 mm (66.0 in) Dirt & Foundry (DF)
bucket.
NOTE: Clearance Circle Radius (R, S, T) values were calculated using a 50/50 weight distribution (center point of
counter rotation centered between the axles) and with the bucket resting flat on ground.
9 - SPECIFICATIONS
MEDIUM VERTICAL FRAME (L218)
COMPONENT
4
631002258
9-5
MEASUREMENT
1347.0 mm (53.0 in)
2037.0 mm (80.2 in)
2133.0 mm (84.0 in)
2251.0 mm (88.6 in)
1606.0 mm (63.2 in)
1371.0 mm (54.0 in)
1642.0 mm (64.6 in)
2690 kg (5930 lb)
818 kg (1803 lb)
1633 kg (3600 lb)
63.8 kg (140.7 lb)
21.3 kg (47.0 lb)
34.0 kg (75.0 lb)
34.0 kg (75.0 lb)
10.0 kg (22.0 lb)