Installing The Metro Esu 1800 On A Desktop Or Shelf - Nortel 1800 Installing

26 Installing the Metro ESU 1800
Power to the Metro ESU 1800-24T-LX-DC and 1800-24T-DC is supplied by
either a DC source that provides reinforced insulation to the AC mains, or DC
mains, which complies with IEC60950-1:2001 requirements. Only service
personnel who have been instructed about the restrictions applied to the location
and about any special precautions may access the unit. Accessing the unit using a
tool is controlled by the authority responsible for the location.
When choosing a place to install the Metro ESU 1800, use the following
guidelines:
•
•
•

Installing the Metro ESU 1800 on a desktop or shelf

When installing the Metro ESU 1800 on a desktop or shelf:
1
2
317808-D
Advarsel: Metro ESU 1800-24T-LX-DC og 1800-24T-DC er bare ment
for bruk i miljøer med kontrollert tilgang. Produktene må ikke brukes på
steder der ukyndige personer kan komme i kontakt med den ubeskyttede
inngangsstrømmen. De må bare installeres og vedlikeholdes av fagfolk.
Ensure that the surface supports at least 3 kg.
Ensure that the power outlet is within 1.82 meters (6 feet) of the unit.
Visually inspect the power cord to see that it is plugged in to the AC or DC
power connector.
Attach the rubber feet included with the device to the bottom of each corner
(see Figure 5 on page
Be sure to allow adequate space for ventilation between the device and the
objects around it.
27).