ABB IRB 8700 Series Product Manual page 733

Removing the hub
1
2
3
4
Product manual - IRB 8700
3HAC052853-001 Revision: F
Action
DANGER
Make sure that all supplies for electrical
power, hydraulic pressure, and air pressure
are turned off.
Unscrew the M6x30 hex socket head cap
screws that secure the hub.
Note
Do not remove the M6x16 torx pan head
screws.
CAUTION
Whenever parting/mating the hub pinion
and gearbox, the gears may be damaged
if excessive force is used.
Fit two screws in opposite holes of the hub
and use them as removal tools.
© Copyright 2015-2018 ABB. All rights reserved.
4.8.4 Replacing the axis-3 gearbox
Note
xx1500002038
Attachment screws: M6x110 (2 pcs)
xx1500002081
Continues on next page
4 Repair
Continued
733