ABB IRB 8700 Series Product Manual page 709

Refitting the hub
1
2
3
4
5
Product manual - IRB 8700
3HAC052853-001 Revision: F
Action
Attach two screws in opposite holes of the
hub and use them as tools to fit the hub.
CAUTION
Whenever parting/mating the hub pinion
and gearbox, the gears may be damaged
if excessive force is used.
Refit the hub.
Remove the two M6x110 and fit the attach-
ment screws for the hub.
Apply locking liquid (Loctite 243) on the
screws.
Note
The number of attachment screws differ
depending on gearbox.
Secure the hub.
© Copyright 2015-2018 ABB. All rights reserved.
4.8.3 Replacing the axis-2 gearbox
Note
Attachment screws: M6x110 (2 pcs)
xx1500002081
xx1500002326
Attachment screws: M6x30 12.9.
Loctite 243
Quantity:
• Axis-1 = 6 pcs
• Axis-2 = 8 pcs
• Axis-3 = 8 pcs
• Axis-4 = 4 pcs
• Axis-5 = 6 pcs
• Axis-6 = 4 pcs
Tightening torque: 14 Nm.
Continues on next page
4 Repair
Continued
709