Parameter
Maximum ambient temperature
Maximum ambient temperature (less than 24 hrs)
Maximum ambient humidity
Operating conditions, robot
The table shows the allowed operating conditions for the robot:
Parameter
Minimum ambient temperature
Maximum ambient temperature
Maximum ambient humidity
i
Protection classes, robot
The table shows the available protection types of the robot, with the corresponding
protection class.
Protection type
Manipulator, protection type Foundry Plus
Product manual - IRB 8700
3HAC052853-001 Revision: F
At low environmental temperature (below 10° C) a warm-up phase is recommended to be run with
the robot. Otherwise there is a risk that the robot stops or runs with lower performance due to
temperature dependent oil and grease viscosity.
© Copyright 2015-2018 ABB. All rights reserved.
2 Installation and commissioning
2.2.1 Pre-installation procedure
Value
+55°C (+131°F)
+70°C (+158°F)
Maximum 95% at constant temper-
ature.
Value
i
+5°C
(41°F)
+50°C (122°F)
Maximum 95% at constant temper-
ature.
Protection class
IP67
Continued
51