Suzuki SY413 Service Manual page 1739

DRUM AND COMPONENTS
REMOVE AND INSTALL BRAKE DRUM
REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove brake drum screws (2 pieces).
1. Screw
2. Brake drum
3) Release parking brake lever.
4) Remove parking brake lever cover and loosen parking brake
cable locking nut.
1. Brake cable
locking nut
5) Remove back plate plug attached to the back side of brake back
plate so as to increase clearance between brake shoe and
brake drum.
Insert a screwdriver into plug hole till its tip contacts shoe hold
down spring and push screwdriver in the arrow direction.
With this push, hold down spring is pushed up and releases
parking shoe lever from hold down spring, resulting in larger
1. Back plate plug
clearance.
6) Pull brake drum off by using 8 mm bolts (2 pieces).
1. 8 .mm bolt
BRAKES 5-45