Suzuki SY413 Service Manual page 1590

3D-22 FRONT SUSPENSION
WHEEL DISC, NUT & BEARING
1) Inspect each wheel disc for dents, distortion and cracks. A disc
in badly damaged condition must be replaced.
2) Check wheel nuts for tightness and, as necessary retighten
them to specification.
Tightening Torque
(a): 85 N·m (8.5 kg-m, 61.5 lb-ft)
3) Check wheel bearing for wear. When measuring thrust play, ap-
ply a dial gauge to wheel hub.
Thrust play limit: 0.4 mm (0.016 in.)
When measurement exceeds limit and shaft nut is tightened to
specified torque, replace bearing.
4) By rotating wheel actually, check wheel bearing for noise and
smooth rotation. If defective, replace bearing.