Suzuki SY413 Service Manual page 1462

1B-28 AIR CONDITIONING (OPTIONAL)
4. Power steering pump pulley
5. Magnet clutch pulley
6. Tension pulley
1. Water pump pulley 7. V-belt
2. Alternator pulley 8. Tensioner nut
3. Crankshaft pulley 9. Tensioner bolt
1. Water pump pulley
2. Generator pulley
3. Crankshaft pulley
4. Power steering pump pulley
C. DRIVE BELT (FOR 1.3L and 1.6L ENGINE
MODELS)
Inspection
1) Check belt for wear and crack, and replace it as required.
2) Check belt tension by measuring how much it deflects when
pushed at intermediate point between Power Steering (P/S)
pump pulley and crank pulley with about 100 N (10 kg, 22 Ib)
force.
Deflection of A/C belt
"a": 7 – 9 mm (0.28 – 0.35 in.)
Tightening Torque
(a): 45 N·m (4.5 kg-m, 32.5 lb-ft)
Replacement
Refer to Section 0B MAINTENANCE SERVICE in this manual for
details.
D. GENERATOR BELT (FOR 1.8L ENGINE MODEL)
Inspection
Refer to Section 0B MAINTENANCE SERVICE in this manual for
details.
Replacement
Refer to Section 6B ENGINE COOLING in this manual for details.
5. Magnet clutch pulley
6. Tensioner pulley
7. V-belt