Suzuki SY413 Service Manual page 1406

0B-10 MAINTENANCE AND LUBRICATION
When carrying out periodic maintenance or vehicle is raised for
other service, check exhaust system as follows:
D Check rubber mountings for damage and deterioration.
D Check exhaust system for leakage, loose connections, dents,
and damages.
If bolts or nuts are loose, tighten them to specification. Refer to
SECTION 6K for torque specification of bolts and nuts.
D Check nearby body areas for damaged, missing or misposi-
tioned parts, open seams, holes, loose connections or other de-
fects which could permit exhaust fumes to seep into vehicle.
D Make sure that exhaust system components have enough clear-
ance from underbody to avoid overheating and possible dam-
age to floor carpet.
D Any defects should be fixed at once.
IGNITION SYSTEM
ITEM 2-1
Spark Plugs Replacement
Replace spark plugs with new ones referring to SECTION 6F2 or
6F3.
FUEL SYSTEM
ITEM 3-1
Air Cleaner Filter Inspection
1) Visually check that air cleaner filter is not excessively dirty, dam-
aged or oily.
2) Clean filter with compressed air from air outlet side of filter (i.e.,
the side facing up when installed).
Air Cleaner Filter Replacement
Replace air cleaner filter with new one according to procedure de-
scribed in SECTION 6A1 or 6A3.