Suzuki SY413 Service Manual page 1595

ON-VEHICLE SERVICE
REMOVE AND INSTALL REAR STRUT
ASSEMBLY
REMOVAL
NOTE:
When servicing component parts of strut assembly, loosen
strut upper nut a little before removing strut assembly. This
will make service work easier. Note, however, nut must not be
removed at this point.
1) Hoist vehicle, allowing rear suspension to hang free.
2) Remove wheel.
3) Remove E ring securing brake hose.
REAR SUSPENSION (2WD VEHICLE) 3E-3
1. Strut assembly
2. Strut upper cap
3. Strut support nut
4. Strut bracket bolt
5. Strut bracket nut
6. Rear knuckle