Suzuki SY413 Service Manual page 1690

4B-4 PROPELLER SHAFTS
1. Propeller shaft No. 1
2. Match marks
3. Propeller shaft No.2
4. Propeller shaft center support
TIGHTENING TORQUE SPECIFICATIONS
1. Center support nuts
2. Propeller shaft No.1 screws
3. Propeller shaft No.2 bolts
4. Center coupling bolts and nuts
INSTALLATION
1) Reverse removal procedure to install propeller shaft, noting fol-
Fastening parts Fastening parts
lowing point.
D When installing propeller shaft, align the match marks.
Otherwise, vibration may occur during driving.
D Use following specification to torque universal joint flange.
Tightening Torque
(a): 23 N·m (2.3 kg-m, 17.0 Ib-ft)
(b): 50 N·m (5.0 kg-m, 36.5 Ib-ft)
.
N m
50
23
Tightening torque
kg-m lb-ft
5.0 36.5
2.3 17.0