Suzuki SY413 Service Manual page 1579

4) Install brake disc.
Tightening Torque
(a): 5.5 N·m (0.55 kg-m, 4.0 lb-ft)
5) Install brake caliper/caliper carrier.
6) Tighten caliper carrier bolts to specified torque.
Tightening Torque
(b): 85 N·m (8.5 kg-m, 61.5 lb-ft)
7) Depress foot brake pedal and hold it there.
Tighten new drive shaft nut to specified torque.
Tightening Torque
(c): 175 N·m (17.5 kg-m, 126.5 lb-ft)
8) Calk drive shaft nut as shown.
1. Caliper carrier bolt
2. Brake disc screw
9) Install wheel and lower hoist.
WARNING:
Be careful while calking nut so that no crack will occur
in calked part of nut. Cracked nut must be replaced
with new one.
FRONT SUSPENSION 3D-11