Suzuki SY413 Service Manual page 1410

0B-14 MAINTENANCE AND LUBRICATION
ITEM 6-2
Tire and Wheel Disc Inspection
[Tire inspection]
1) Check tire for uneven or excessive wear, or damage. If defec-
tive, replace.
1. Wear indicator
2) Check inflating pressure of each tire and adjust pressure to
specification as necessary.
NOTE:
D Tire inflation pressure should be checked when tires are
cool.
D Specified tire inflation pressure should be found on tire
placard or in owner's manual which came with vehicle.
[Wheel disc inspection]
Inspect each wheel disc for dents, distortion and cracks. A disc in
badly damaged condition must be replaced.
[Tire rotation]
Rotate tires.
For details of the steps, refer to SECTION 3F.
ITEM 6-2'
Wheel Bearing Inspection
1) Check front wheel bearing for wear, damage, abnormal noise
or rattles. For details, refer to FRONT SUSPENSION INSPEC-
TION of SECTION 3D.
2) Check rear wheel bearing for wear, damage abnormal noise or
rattle. For details, refer to REAR SUSPENSION INSPECTION
of SECTION 3E.