Suzuki SY413 Service Manual page 1736

5-42 BRAKES
1. Brake disc
2. Screw
REMOVE AND INSTALL DISC
REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove caliper assembly by loosening carrier bolts (2 pieces).
CAUTION:
During removal, be careful not to damage brake flex-
ible hose and not to depress brake pedal.
3) Remove brake disc screw (If equipped).
4) Pull brake disc off by using 8 mm bolts (2 pieces).
1. 8 mm bolt
INSTALLATION
NOTE:
See NOTE at the beginning of this section.
1) Install disc to wheel hub.
2) Install caliper assembly to steering knuckle.
3) Torque caliper carrier bolts to specification.
Tightening Torque
(a): 5.5 N
(b): 85 N
4) Torque front wheel nuts to specification.
5) Upon completion of installation, perform brake test.
.
m (0.55 kg-m, 4.0 lb-ft)
.
m (8.5 kg-m, 61.5 lb-ft)