Suzuki SY413 Service Manual page 1544

3C-14 STEERING WHEEL AND COLUMN (NOT EQUIPPED WITH AIR BAG)
1. Hole cover
1. Steering shaft joint bolts
STEERING SHAFT LOWER JOINT
REMOVAL
1) Turn steering wheel so that vehicle's front tires are at straight-
ahead position.
2) Turn ignition switch to "LOCK" position and remove key.
3) Remove hole cover.
4) Pull off floor carpet at the foot of steering shaft and remove
steering joint upper and lower cover.
5) Loosen steering shaft joint bolts.
6) Remove steering column lower nuts, and then loosen upper
nuts.
7) Remove steering shaft joint bolts and then remove steering
1. Steering shaft
joint bolts
shaft lower joint.
2. Steering shaft
lower joint