1D-58 Engine Mechanical:
Air Cleaner Outlet Duct Replacement
Removal Procedure
1. Remove the fuel injector sight shield. Refer to "Fuel
Injector Sight Shield Replacement".
2. Remove the positive crankcase ventilation (PCV)
tube from the air cleaner outlet duct.
3. Loosen the air cleaner outlet duct clamps at the
throttle body and the mass air flow (MAF)/intake air
temperature (IAT) sensor.
4. Remove the air cleaner intake duct from the MAF/
IAT sensor and the throttle body.
Repair Instructions
Installation Procedure
1. Install the air cleaner intake duct to the MAF/IAT
sensor and the throttle body.
!
Refer to "Fastener Notice: ".
2. Tighten the air cleaner outlet duct clamps at the
throttle body and the MAF/IAT sensor.
Tightening torque
Tighten the clamps to 4 N⋅m (35 lb in).
3. Install the PCV tube to the air cleaner outlet duct.
4. Install the fuel injector sight shield. Refer to "Fuel
Injector Sight Shield Replacement".
CAUTION