Table of Contents
Advertisement
11. Using the EN 46111, rotate the crankshaft until the
left cylinder head camshafts align with the EN
46105-2 and the right cylinder head camshafts align
with the EN 46105-1.
12. Install the EN 46105-1 to the right camshafts.
13. Install the EN 46105-2 to the left camshafts.
Reference: "Engine Front Cover Disassemble: ".
Secondary Camshaft Drive Chain Tensioner
Removal - Right Side (Third Design)
Reference: "Engine Front Cover Removal (Third
Design): ".
1. Remove the right secondary camshaft drive chain
tensioner bolts.
2. Remove the right secondary camshaft drive chain
tensioner.
3. Remove and discard the right secondary camshaft
drive chain tensioner gasket.
4. Inspect the right secondary camshaft drive chain
tensioner mounting surface on the right cylinder
head for burrs or any defects that would degrade the
sealing of the NEW right secondary camshaft drive
chain tensioner gasket.
Engine Mechanical:
1D-141
Advertisement
Table of Contents
Troubleshooting
