Suzuki XL7 2007 Service Manual page 388

1D-48 Engine Mechanical:
Step
Inspect the components of the engine driven accessory
system for the following:
• Loose and/or missing fasteners
– Heat Shields, if equipped
– Joints and/or couplings:
Nuts, bolts, studs, clamps, straps
– Bracket and/or insulator mounting
• Inadequate clearance to body and/or chassis components
Inspect with the accessory system both under a LOAD and
NOT loaded
• Improper alignment
11
• Bent or damaged pulleys
• Disconnected and/or missing insulators
• Cracked, dry-rotted, and/or oil-soaked component
insulators
• Stretched, twisted, broken, torn, and/or collapsed
component insulators
• Bent, twisted, cracked and/or deformed component
brackets
Repair, replace, and/or realign the engine driven accessory
system components as indicated by the inspection.
Did you find and correct a condition?
1. Remove the engine driven accessory and bracket, or
brackets from the engine.
2. Thoroughly inspect the accessory bracket, or brackets,
bolts/nuts/studs, and the accessory itself for signs of the
following:
12
Bent, twisted, cracked and/or deformed conditions
3. Replace any of the components found to exhibit any of
these conditions.
4. Reinstall the components to the engine.
Did you find and correct a condition?
Action Yes
Go to Step 13 Go to Step 12
Go to Step 13 Go to Step 17
No