Table of Contents
Advertisement
1D-92 Engine Mechanical:
Installation Procedure
1. Ensure that the left secondary camshaft drive chain
shoe (2) is being installed.
2. Position the left secondary camshaft drive chain
shoe.
CAUTION
!
Refer to "Fastener Notice: ".
3. Install the secondary camshaft drive chain shoe bolt.
Tightening torque
Tighten the secondary camshaft drive chain
shoe bolt to 23 N⋅m (17 lb ft).
4. Install the left bank secondary camshaft drive chain
tensioner. Refer to "Secondary Camshaft Drive
Chain Tensioner Installation - Left Side (Third
Design)" "Secondary Camshaft Drive Chain
Tensioner Installation - Left Side (Fourth Design)".
5. Install the engine front cover. Refer to "Engine Front
Cover Replacement".
6. Install the spark plugs. Refer to "Spark Plug
Replacement: ".
Secondary Camshaft Drive Chain Shoe
Replacement - Right Side
Removal Procedure
1. Remove the spark plugs in order to ease crankshaft/
engine rotation. Refer to "Spark Plug Replacement:
".
2. Remove the engine front cover. Refer to "Engine
Front Cover Replacement".
3. Remove the right bank secondary camshaft drive
chain tensioner. Refer to "Secondary Camshaft Drive
Chain Tensioner Removal - Right Side (Third
Design)" "Secondary Camshaft Drive Chain
Tensioner Removal - Right Side (Fourth Design)".
4. Remove the right bank secondary camshaft drive
chain shoe. Refer to "Secondary Camshaft Drive
Chain Shoe Removal - Right Side (Third Design)"
"Secondary Camshaft Drive Chain Shoe Removal -
Right Side (Fourth Design)".
Advertisement
Table of Contents
Troubleshooting
