Table of Contents
Advertisement
1K-19 Exhaust System:
Installation Procedure
1. Position the dash panel heat shield to the
underbody, installing the shield over the stud.
CAUTION
!
Refer to "Fastener Notice: ".
2. Install the dash panel heat shield nut.
Tightening torque
Tighten the nut to 10 N⋅m (89 lb in).
3. Install NEW rivets.
4. Lower the vehicle.
Exhaust Manifold Heat Shield Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to "Lifting and
Jacking the Vehicle: ".
2. Remove the rear exhaust manifold heat shield bolts
and shield.
Installation Procedure
CAUTION
!
Refer to "Fastener Notice: ".
1. Position the rear exhaust manifold heat shield to the
engine and install the bolts.
Tightening torque
Tighten the bolts to 50 N⋅m (37 lb ft).
2. Lower the vehicle.
Advertisement
Table of Contents
Troubleshooting
