Table of Contents
Advertisement
9. Remove and discard the thermostat housing gasket.
Water Pump Removal
Reference: "Camshaft Cover Removal - Right Side: ".
Special tool
EN 46104 Water Pump Pulley Holding Tool
1. Install the EN 46104 (1) onto the water pump pulley.
Engine Cooling System:
2. Remove the water pump pulley bolts.
3. Remove the water pump pulley.
4. Remove the water pump bolts.
5. Remove the water pump from the front cover.
6. Remove the water pump gasket.
Reference: "Water Pump Cleaning and Inspection: ".
1F-50
Advertisement
Table of Contents
Troubleshooting
