Suzuki XL7 2007 Service Manual page 641

12. Verify the primary and left secondary camshaft drive
chain timing mark alignments (1-12). Also refer to
"Camshaft Timing Drive Chain Alignment Diagram
(Third Design)" "Camshaft Timing Drive Chain
Alignment Diagram (Fourth Design)"- Stage One.
13. Remove the EN 46105-1 from the rear of the left
camshafts.
14. Using the EN 46111, rotate the crankshaft and
crankshaft sprocket from the stage 1 alignment
position (1) to the stage 2 alignment position (2), 115
crankshaft degrees, in order to install the right
secondary camshaft drive chain components.
15. Install the EN 46105-2 onto the rear of the left
camshafts.
Engine Mechanical: 1D-301