Table of Contents
Advertisement
13. Loosely install a 10 x 1.5 mm bolt in the "jackscrew"
hole (1).
14. Using the pry points (2) located at the edge of the
front cover and the "jackscrew", shear the RTV
sealant.
15. Remove the engine front cover.
16. Using the EN 46111, rotate the crankshaft until the
left cylinder head camshafts align with the EN
46105-2 and the right cylinder head camshafts align
with the EN 46105-1.
17. Install the EN 46105-1 to the right camshafts.
Engine Mechanical:
1D-85
Advertisement
Table of Contents
Troubleshooting
