Oil Pump Assemble - Suzuki XL7 2007 Service Manual

1E-19 Engine Lubrication System:

Oil Pump Assemble

Reference: "Oil Pump Cleaning and Inspection: ".
1. Install the oil pressure relief valve components.
a. Install the oil pressure relief valve.
b. Install the oil pressure relief valve spring.
c. Install the oil pressure relief valve bore plug.
d. Install the oil pressure relief valve bore plug
retainer C-clip.
NOTE
There are no serviceable components within
the oil pump. Disassemble the pump only to
diagnose an oiling concern. A disassembled
oil pump must be replaced. DO NOT reuse a
disassembled oil pump or a serviceable oil
pump with a primary camshaft drive chain
lower guide that needs to be replaced.
2. The dimpled surface must be face-up in the pump
body.
3. Install the inner and the outer rotors in the oil pump
cover in the same orientation as removed.
4. The outer rotor has a dimple to indicate the outer
surface.
5. Assemble the oil pump housing and cover.