Table of Contents
Advertisement
Generator Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to
"Battery Negative Cable Disconnection and
Connection".
2. Reposition the positive battery cable boot at the
generator terminal.
3. Remove the positive battery cable nut at the
generator.
4. Remove the positive battery cable terminal from the
generator.
5. Disconnect the engine harness electrical connector
from the generator.
6. Remove the drive belt. Refer to "Drive Belt
Replacement: ".
7. Remove the idler pulley. Refer to "Drive Belt Idler
Pulley Replacement: ".
8. Remove the generator bolts.
NOTE
When removing the generator from the
vehicle, it may be necessary to maneuver the
generator to remove it from the vehicle.
9. Remove the generator.
Installation Procedure
1. Position the generator to the engine.
2. Loosely install the generator bolts.
3. Install the idler pulley. Refer to "Drive Belt Idler
Pulley Replacement: ".
CAUTION
!
Refer to "Fastener Notice: ".
Charging System:
1J-54
Advertisement
Table of Contents
Troubleshooting
