Table of Contents
Advertisement
10. Install the fuel injector harness connector to the
engine coolant air bleed pipe bracket.
11. Install the engine coolant air bleed pipe bracket bolts
to the upper intake manifold.
Tightening torque
Tighten the engine coolant air bleed pipe bracket
bolts to 10 N⋅m (89 lb in).
12. Install and connect the fresh air PCV hose to the left
camshaft cover fitting.
Reference: "Engine Flywheel Installation: ".
Engine Flywheel Installation
Reference: "Engine Flywheel Cleaning and Inspection: ".
Special tool
EN 46106 Engine Flywheel Holding Tool
J 45059 Angle Meter
1. Place the engine flywheel in position on the
crankshaft.
2. Install 2 NEW bolts in location at the top and bottom
of the engine flywheel bolt pattern allowing the
engine flywheel to hang in position.
Engine Mechanical:
1D-329
Advertisement
Table of Contents
Troubleshooting
