Suzuki XL7 2007 Service Manual page 958

1K-9 Exhaust System:
5. Install the catalytic converter to exhaust manifold
nuts (1).
Tightening torque
Tighten the nuts to 50 N⋅m (37 lb ft).
6. Install the oil level indicator. Refer to "Oil Level
Indicator and Tube Replacement: ".
7. Install the exhaust manifold heat shield. Refer to
"Exhaust Manifold Heat Shield Replacement - Left
Side".
Exhaust Manifold Replacement - Right Side
Removal Procedure
WARNING
!
Refer to "Exhaust Service Caution".
WARNING
!
Refer to "Protective Goggles and Glove
Caution: ".
1. Remove the exhaust manifold heat shield. Refer to
"Exhaust Manifold Heat Shield Replacement - Right
Side".
2. Remove the catalytic converter to exhaust manifold
nuts (1).
3. Remove the right catalytic converter. Refer to
"Catalytic Converter Replacement - Right Side".
4. Remove the exhaust manifold bolts.
NOTE
Do not reuse the gasket.
5. Remove the exhaust manifold and gasket out from
vehicle. Discard the gasket.