Table of Contents
Advertisement
1K-29 Exhaust System:
6. Install the engine coolant temperature (ECT) sensor.
Tightening torque
Tighten the ECT sensor to 22 N⋅m (16 lb ft).
7. Place the left exhaust manifold heat shield in
position.
8. Install the exhaust manifold heat shield bolts.
Tightening torque
Tighten the exhaust manifold heat shield bolts to
10 N⋅m (89 lb in).
Reference: "Oil Level Indicator and Tube Installation: ".
Exhaust Manifold Installation - Right Side
Reference: "Exhaust Manifold Cleaning and Inspection -
Right Side: ".
1. Install the engine block heater, if equipped.
Advertisement
Table of Contents
Troubleshooting
