Engine Rear Mount Replacement - Suzuki XL7 2007 Service Manual

1D-66 Engine Mechanical:

Engine Rear Mount Replacement

Removal Procedure
1. Remove the air cleaner assembly. Refer to "Air
Cleaner Assembly Replacement".
2. Support the engine. Refer to "Engine Support
Fixture".
3. Raise and support the vehicle. Refer to "Lifting and
Jacking the Vehicle: ".
4. Remove three engine mount bracket bolts (1).
5. Remove engine mount bracket to engine mount bolt.
6. Remove engine mount from vehicle.
Installation Procedure
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
1. Position engine mount in place and install engine
mount bracket to engine mount bolt.
Tightening torque
Tighten the bolt to 50 N⋅m (38 lb ft).
2. Install the engine mount to frame bolts (1).
Tightening torque
Tighten the engine mount bolts to 50 N⋅m (38 lb
ft).
3. Lower the vehicle.
4. Remove the engine support. Refer to "Engine
Support Fixture".
5. Install the air cleaner assembly. Refer to "Air Cleaner
Assembly Replacement".
Engine Mount Replacement - Right Side
Removal Procedure
1. Remove the air cleaner assembly. Refer to "Air
Cleaner Assembly Replacement".
2. Remove the drive belt. Refer to "Drive Belt
Replacement".
3. Support the engine. Refer to "Engine Support
Fixture".
4. Raise and support the vehicle. Refer to "Lifting and
Jacking the Vehicle: ".
5. Remove three upper engine mount bracket bolts (1).
6. Loosen right upper front engine mount bracket bolt
(2).