Table of Contents
Advertisement
1D-72 Engine Mechanical:
Fuel Injector Sight Shield Replacement
Removal Procedure
1. Remove the oil fill cap.
2. Lift upward and remove cover from ballstuds.
Installation Procedure
1. Push downward on cover and lock into place on
ballstuds.
2. Install the oil fill cap.
Crankcase Ventilation Hoses/Pipes
Replacement (Front)
Removal Procedure
1. Remove the engine cover. Refer to "Fuel Injector
Sight Shield Replacement".
2. Disconnect the positive crankcase ventilation (PVC)
fresh air pipe from the air cleaner duct.
3. Disconnect the PVC air pipe from the valve cover.
Installation Procedure
1. Connect the PVC air pipe to the valve cover valve.
2. Connect the PVC fresh air pipe to the air cleaner
duct.
3. Install the engine cover. Refer to "Fuel Injector Sight
Shield Replacement".
Advertisement
Table of Contents
Troubleshooting
