1, (a)
8) Install camshaft housing bolts (1) and tighten them to specified
torque.
Tightening Torque
(a): 11 N·m (1.1 kg-m, 8.0 lb-ft)
Check valve clearance again after adjusting it.
9) After checking and adjusting all valves, reverse removal proce-
dure for installation.
AIR CLEANER ELEMENT
REMOVAL
1) Open air cleaner case by unhooking its clamps.
2) Remove air cleaner element from case.
INSPECT
Check air cleaner element for dirt. Replace excessively dirty ele-
ment.
CLEAN
Blow off dust by compressed air from air outlet side of element.
INSTALLATION
Reverse removal procedure for installation.
ENGINE MECHANICAL 6A4-11