Oil Pan Installation - Suzuki XL7 2007 Service Manual

Oil Pan Installation

Reference: "Oil Pan Assemble: ".
Special tool
EN 46109 Guide Pin Set
1. Install the 8 mm (0.315 in) guides from the EN 46109
into the center oil pan rail bolt hole on each side of
the engine block.
2. Place a 3 mm (0.118 in) bead (1) of RTV sealant,
GM P/N 12378521 (Canadian P/N 88901148) or
equivalent, on the block pan rail and the crankshaft
rear oil seal housing.
Engine Lubrication System:
3. Position the oil pan onto the block.
4. Remove the EN 46109 8 mm (0.315 in) guides from
the engine block.
5. Loosely install the oil pan bolts.
1E-26