Table of Contents
Advertisement
1D-120 Engine Mechanical:
Engine Flywheel Replacement
Removal Procedure
1. Remove the transmission. Refer to "Transaxle
Replacement: ".
2. Remove the engine flywheel bolts and flywheel.
Refer to "Engine Flywheel Removal".
3. Clean and inspect the flywheel. Refer to "Engine
Flywheel Cleaning and Inspection". If the flywheel
teeth are damaged, inspect the starter for proper
operation. Replace the starter if you find excessive
wear or damage to the starter drive. Refer to "Starter
Motor Replacement: ".
Installation Procedure
1. Install the engine flywheel and bolts. Refer to
"Engine Flywheel Installation".
2. Install the transmission. Refer to "Transaxle
Replacement: ".
Crankshaft Rear Oil Seal and Housing
Replacement
Removal Procedure
1. Remove the engine flywheel. Refer to "Engine
Flywheel Replacement".
2. Remove the oil pan. Refer to "Oil Pan Replacement:
".
3. Remove the crankshaft rear oil seal and housing.
Refer to "Crankshaft Rear Oil Seal and Housing
Removal".
Installation Procedure
1. Install the crankshaft rear oil seal and housing. Refer
to "Crankshaft Rear Oil Seal and Housing
Installation".
2. Install the oil pan. Refer to "Oil Pan Replacement: ".
3. Install the engine flywheel. Refer to "Engine
Flywheel Replacement".
Advertisement
Table of Contents
Troubleshooting
