Suzuki XL7 2007 Service Manual page 471

2. Remove the crankshaft balancer bolt.
3. Install the J 38416-2 in the nose of the crankshaft.
4. Install the J 41816 in order to remove the crankshaft
balancer.
5. Tighten the center bolt of the J 41816 in order to pull
the crankshaft balancer off of the crankshaft.
6. Remove the J 41816 from the crankshaft balancer.
Reference: "Crankshaft Balancer Cleaning and
Inspection: ".
Engine Flywheel Removal
Reference: "Crankshaft Balancer Removal: ".
Special tool
EN 46106 Flywheel Holding Tool
1. Remove the engine flywheel bolts and discard.
2. Remove the engine flywheel from the crankshaft.
Engine Mechanical: 1D-131