Oil Filter Adapter Installation - Suzuki XL7 2007 Service Manual

1E-27 Engine Lubrication System:
CAUTION
!
Refer to "Fastener Notice: ".
6. Tighten the oil pan bolts in sequence shown.
Tightening torque
1. Tighten the 8 mm bolts (1-11) to 23 N⋅m (17 lb
ft).
2. Tighten the 6 mm bolts (12, 13) to 10 N⋅m (89
lb in).
Reference: "Cylinder Head Installation - Right Side: ".
Reference: "Cylinder Head Installation - Left Side: ".

Oil Filter Adapter Installation

Reference: "Oil Filter Adapter Assemble: ".
1. Position the left knock sensor to the cylinder block as
shown.
CAUTION
!
Refer to "Fastener Notice: ".
2. Install the knock sensor bolt.
Tightening torque
Tighten the knock sensor bolt to 23 N⋅m (17 lb ft).
3. Ensure the knock sensor is oriented with the harness
connector positioned down and slightly to the rear of
the engine (1).
4. Position a NEW oil filter adapter gasket onto the oil
filter adapter.