Suzuki GA413 Service Manual page 649

1. Slide hinge
2. Door stopper
3. Screw
1. Door latch striker
2. Shim 4. Front side
3. Door 5. Body
3) Adjust slide hinge so that door rear surface and body surface
align each other and at the same time clearance between door
rear end and body is equal to clearance between rear door front
end and front door rear end with the door closed.
4) Adjust the rear door stoppers and tighten the screws.
Insert or adjust the number of spacer between stopper and body
if necessary.
Door latch striker position adjustment
Adjust striker position by referring to FRONT DOOR LOCK
INSTALLATION.
Dimension "a": 3.25 – 5.25 mm (0.13 – 0.21 in.)
Greasing point
Apply multi-purpose grease to sliding parts as shown in the figure.
1. Greasing point
BODY SERVICE 9-13