Suzuki GA413 Service Manual page 369

1. Oil pump
2. Bolt
REMOVAL
1) Remove engine assembly from body as previously outlined.
2) Separate transmission from engine, then remove clutch cover,
clutch disc and flywheel.
Special Tool
(A): 09924-17810
1. Flywheel bolt
3) Remove crankshaft pulley, timing belt and crankshaft timing
pulley.
4) Remove cylinder head assembly.
5) Remove upper oil pan with lower oil pan and oil pump strainer.
6) Remove oil pump.
7) Remove oil seal housing.
8) Remove connecting rod bearing caps.
9) Loosen crankshaft bearing cap bolts in such order as indicated
in figure a little at a time and remove bearing caps.
10) Remove crankshaft from cylinder block.
ENGINE MECHANICAL 6A-63