Download Print this page

Suzuki GA413 Service Manual page 1114

Hide thumbs Also See for GA413:

Advertisement

7E-4 DIFFERENTIAL (FRONT)
Viscosity chart SAE
Temperature
ON VEHICLE SERVICE
MAINTENANCE SERVICE
NOTE:
D When having driven through water, check immediately if wa-
ter has entered (if so, oil is cloudy). Water mixed oil must be
changed at once.
D Whenever vehicle is hoisted for any other service work than
oil change, also be sure to check for oil leakage and status
of breather hoses.
CHANGING OIL
NOTE:
D Hypoid gear oil must be used for differential.
D It is highly recommended to use SAE 80W – 90 viscosity.
1) Before oil change or inspection, be sure to stop engine and lift
up vehicle horizontally.
2) Check oil level and existence of leakage. If leakage is found, cor-
rect its cause.
3) Drain old oil and pour proper amount of gear oil as specified be-
low (roughly up to level hole).
4) Apply sealant to thread of drain plug and torque plug to specifi-
cation.
"A": Sealant 99000-31110
Tightening Torque
.
(a): 23 N
m (2.3 kg-m, 17.0 lb-ft)
5) Apply sealant to thread of level/filler plug and torque it in the
same way as drain plug.
Specified gear oil: Hypoid gear oil API GL-5
SAE 75W – 85, 90 or 80W – 90
For oil viscosity, refer to left chart.
Oil capacity: 0.8 liters (1.7/1.4 US/lmp. pt)

Hide quick links:

Advertisement

Chapters

loading