Suzuki GA413 Service Manual page 693

3RD SEAT BELT (IF EQUIPPED)
WARNING:
Be sure to read SERVICE PRECAUTIONS in this section before starting to work and observe every
precaution during work.
REMOVAL
Remove 3rd seat belts.
Lap-shoulder belt type
1. Upper anchor
2. Lower anchor
3. Retractor assembly
4. Buckle
5. 3rd seat belt
INSPECTION
Check the 3rd seat belt in the same way as when inspecting front seat belt. (Refer to INSPECTION of FRONT
SEAT BELT in this section.)
INSTALLATION
Install the 3rd seat belt observing the same precautions as when installing front seat belt. (Refer to INSTALLA-
TION of FRONT SEAT BELT in this section.)
D Be sure to tighten seat belt anchor bolts (a) and screws (b) to specified torque.
RESTRAINT SYSTEM 10-7
Lap belt type
Tightening Torque
.
(a): 35 N m (3.5 kg-m, 25.5 lb-ft)
.
(b): 5.5 N m (0.55 kg-m, 4.0 lb-ft)