Suzuki GA413 Service Manual page 1104

7A1-10 MANUAL TRANSMISSION (4WD)
12) Remove gear shift guide bolt (1) and 3 bolts and disconnect
gear shift and select shaft assembly (2).
13) Remove all bolts and separate transfer front case (1) from
transmission case (2).
When separating transfer front case from transmission case,
make sure that reverse idler gear and shaft remain at their origi-
nal position on transmission case side.
14) For AXC externally mounted type:
Uncaulk and remove output front shaft nut by using special
tool.
Special Tool
(A): 09930-40113
15) For AXC externally mounted type:
Remove output front shaft rear bearing (2) by using special
tool.
Special Tool
(A): 09913-65135
16) Remove front drive sprocket (1) by using special tool in the
same way as in step (2).
Special Tool
(A): 09913-65135