Gear Shift Lever - Suzuki GA413 Service Manual

3. Transmission case
CAUTION:
When removing yoke pin, be sure not to drive it out so
far as to contact case. Or it will cause damage to case.
2) Using special tool, drive out spring pin (2) on high speed gear
shift fork (1), and pull out shift shaft (4).
As in above case, be careful not to let locating ball, interlock ball
and spring fly away.
Special Tool
(A): 09922-85811
3) Drive spring pin out of low speed gear shift fork (1) as in above
step 2) and pull out shift shaft (2).
Special Tool
(A): 09922-85811
INSPECTION

Gear Shift Lever

Check lower end of gear shift lever where gear shift fork shaft con-
tact for wear and any kind of damage. Worn or damaged gear shift
lever must be replaced with a new one.
MANUAL TRANSMISSION 7A-15