Suzuki GA413 Service Manual page 1072

3. Rubber surface
Steering Knuckle
1) Using special tool, remove snap ring (1).
Special Tool
(A): 09900-06108
2) Remove bearing outer race/inner bearing using special tools
and hydraulic press (1).
Special Tool
(B): 09924-84510
(C): 09913-75821
ASSEMBLY AND INSTALLATION
1) Install new wheel bearing (1) using special tool and hydraulic
press (2).
Special Tool
(A): 09913-75520
NOTE:
D Do not reuse wheel bearing.
D Note the installing direction of bearing.
2) Insert new stud bolt (1) in hub hole. Rotate stud slowly to assure
serrations are aligned with those made by original bolt.
2. Rod
3. Hydraulic press
3) Using special tool, install snap ring (1) to knuckle (2).
Special Tool
09900-06108
FRONT SUSPENSION (4WD) 3D1-15