Suzuki GA413 Service Manual page 697

1. Driver side air bag
2. Passenger side air bag (if equipped)
OPERATION OF AIR BAG SYSTEM AT COLLISION
Frontal crash
1. SDM
2. Sensor
3. Power source
4. Voltage converter
GENERAL DESCRIPTION
With the air bag system which includes air bag(s) for the driver's
and passenger's (if equipped) sides, the driver air bag (inflator)
module is deployed from the center of the steering column and the
passenger air bag (inflator) module from the top of the instrument
panel in front of the front passenger seat (if equipped) in occur-
rence of a front collision with an impact larger than a certain set val-
ue to supplement protection offered by the driver and front
passenger (if equipped) seat belts.
The air bag system is designed to activate only in severe frontal
collisions. It is not designed to activate in rear impacts, side im-
pacts, rollovers, or minor frontal collisions, since it would offer no
protection in those types of accidents.
5. Safing sensor
6. Micro-controller
7. Energy reserve circuit
8. Ignition driver circuit
AIR BAG SYSTEM 10B-3
9. Driver air bag
10. Passenger air bag (if equipped)
11. Squib circuit