The Function Table; The Procedure For Setting Parameters - A&D HV-60KGL-WP Instruction Manual

15. The Function Table

The function table is the function to store and refer items that determine the
performance of the scale. Each item has a parameter.
The parameters are maintained even without power applied.

15.1. The Procedure for Setting Parameters

Step 1 Turn off the display.
Press and hold the
key.
Step 2 Set parameters for each item using the following keys.
key
∧
key
＜
key
F
key
ENTER
Step 3 Press the
is displayed.
end
Note Pressing the
stored in the scale.
key and press the
ZERO
Selecting the parameter of an item.
Selecting the number of a figure at f16.
Selecting a figure at f16..
Proceeding to the end of the table
without storing the parameter.
Storing a parameter for the current item
and proceeding to the next item.
Returning to normal mode from the end
of the table.
key to return to the normal mode, when
ENTER
key at step 2, the parameter is
ENTER
ON/OFF
Page 44 HVG-WP Series