Function Table; Parameter Setting Procedure - A&D HW-10KCEP Instruction Manual

14.
The function table is used to store and refer items that determine the performance of
the scale. Each item has a parameter.
The parameters are stored in the scale even if the power is removed.
Item

14.1. Parameter Setting Procedure

Step 1 Turn off the display.
Press and hold the
to display software version
Press the
Class ba5fnc
Step 2 Press the
press the
Step 3 The first item of class is displayed. Press the
key to select the desired item, and then enter a value
using numerical keypad.
Step 4 Press the
class after displaying
Step 5 Press the

Function Table

Parameter
key and press the
TARE
p-XXX .
key to enter function setting mode.
MODE
.
key to select the desired class, and then
MODE
key.
ENTER
key to store. The display returns to
ENTER
end
key to return to normal weighing mode.
ZERO
ON/OFF
MODE
.
Page 34
Display off
Press
and hold
key
and press
Class
Items
Weighing value
HV/HW-CEP Series
Enter using
numerical
key pad