Related Manuals for A&D UC-321PL
Summary of Contents for A&D UC-321PL
- Page 1 Precision Health Scale UC-321PL Instruction Manual Manuel d ’ instructions Manual de Instrucciones Manuale di Istruzioni Bedienungsanleitung Gebruiksaanwijzing 使用手册 1WMPD4002089...
-
Page 2: Table Of Contents
Contents Before Use Precautions -------------------------------------------------------------------------------------- 1 Scale Components ------------------------------------------------------------------------------ 2 Display Symbols --------------------------------------------------------------------------------- 3 Installing (or Replacing) Batteries ---------------------------------------------------------- 3 Operations Basic Measurement ----------------------------------------------------------------------------- 4 Measuring Your Weight-------------------------------------------------------------------------------------- 4 Measuring an Infant or Small Animal--------------------------------------------------------------------- 5 Measuring Your Weight on a Carpet -------------------------------------------------------- 6 References Specifications ------------------------------------------------------------------------------------- 7 Maintaining the Scale --------------------------------------------------------------------------- 7... -
Page 3: Scale Components
Scale Components Display Back Ready/Complete Symbol Low Battery Indicator Slide Switch Front Measurement Switch Battery Compartment The following measurements can be selected by the slide switch and are classified into two categories - WEIGHT A and WEIGHT B. Within WEIGHT A and WEIGHT B, you have a choice to select and have your weight displayed in kg or lb. -
Page 4: Display Symbols
Display Symbols Ready/Complete symbol. This symbol is displayed when the measurement display is stable. Low battery indicator. If this symbol is displayed, replace all four batteries with new ones. Installing (or Replacing) Batteries Caution Insert each battery with its positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment. -
Page 5: Basic Measurement
Basic Measurement Measuring Your Weight Set the slide switch 1. Set the slide switch to the correct mode. to the correct mode Example: Set the slide switch to [WEIGHT B]. Press the measurement switch 2. Press the measurement switch gently. All display segments are displayed for several seconds. -
Page 6: Measuring An Infant Or Small Animal
Basic Measurement Measuring an Infant or Small Animal Set the slide switch to the correct mode 1. Set the slide switch to the correct mode. Example: Set the slide switch to [WEIGHT B]. Press the measurement switch Step on the scale 2. -
Page 7: Measuring Your Weight On A Carpet
Measuring Your Weight on a Carpet Place the scale on a solid level surface, such as tile, wood, or laminate flooring. If the scale must be used on a carpet, be sure to attach the plastic add-on feet. Steps for Attaching the Add-on Feet 1. -
Page 8: Specifications
Specifications Digital display Liquid crystal display, 25 mm character height Maximum capacity 200 kg / 450 lb Minimum display 0.1 kg / 0.2 lb Power source Four type AA batteries (R6P or LR6, 1.5 volt x 4) Battery life Approximately 1000 measurements Accessories Add-on feet (4), Instruction manual, Batteries (4) Specifications are subject to change without prior notice or any obligation on the... -
Page 9: Before Requesting Service
Before Requesting Service Problems Corrective Action Nothing is displayed by pressing the Check the battery installation. measurement switch. Replace all four batteries with new ones. “88888” remains displayed. Remove and reinstall the batteries. “e- 0” is displayed. Place the scale on a solid level The difference between an estimated surface. - Page 10 1-243 Asahi, Kitamoto-shi, Saitama 364-8585 JAPAN Telephone: [81] (48) 593-1111 Fax: [81] (48) 593-1119 A&D INSTRUMENTS LTD. Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY United Kingdom Telephone: [44] (1235) 550420 Fax: [44] (1235) 550485 A&D ENGINEERING, INC. 1756 Automation Parkway, San Jose, California 95131 U.S.A.