Recalling The Calibration - HP 8712ES User Manual

NOTE
Calibrating for Increased Measurement Accuracy
Saving and Recalling the Calibration

Recalling the Calibration

Measurement calibration information is linked to the instrument state
and measurement parameters for which the calibration was done.
Therefore, a saved calibration can be recalled and used for multiple
instrument states as long as the measurement parameter, frequency
range, and number of points are compatible. To recall your calibration
from the analyzer's internal non-volatile RAM disk, volatile RAM disk,
or a floppy disk in the built-in disk drive:
1. Press
SAVE RECALL
corresponds to the location where your desired file exists.
2. If necessary, change directories to the directory that contains the
desired file as described in
3. Press Prior Menu
highlighted bar to the file you want to recall.
4. Press Recall State
analyzer.
Refer to "Saving and Recalling Measurement Results" on page 4-55
more information on saving, recalling, renaming, and copying files.
6-34
Select Disk and press the key that
"To Use Directory Utilities" on page
and turn the front panel knob to move the
to recall the desired file to the network
4-65.
for
ES User's Guide