HP 8712ES User Manual page 316

Autozero
Aux Input
Average Factor
Average on OFF
AVG
Hardkey/Softkey Reference
A
Softkey in the CAL
internal or external broadband detectors. Periodically, this feature
compensates for external detector drift due to changes in temperature.
When this softkey is selected, the detector(s) are automatically zeroed
every five minutes.
CAUTION
Softkey in the detection options menu. Select this softkey to make very
low frequency voltage measurements with the Auxiliary Input, located
on the rear panel of the analyzer.
See "Making Measurements with the Auxiliary Input" on page 3-67
more information.
Access Keys:
MEAS 1
Softkey in the
AVG
powers of 2. Acceptable values are: 1, 2, 4, 8, 16, 32, and 64. The
default averaging factor is 16, the maximum is 64.
See "To Reduce the Receiver Noise Floor" on page 5-10
information on how averaging works.
Softkey in the
AVG
averaging function. Averaging reduces random noise by averaging the
measurement data from sweep to sweep.
See "To Reduce the Receiver Noise Floor" on page 5-10
information on how averaging works.
Hardkey in the CONFIGURE area. Displays the menu that allows
selection of averaging parameters as well as system bandwidth and
delay aperture selections.
See "To Reduce the Receiver Noise Floor" on page 5-10
information on how averaging works.
8-10
menu. This softkey is only available when using
Do not use Autozero
See Manual Zero
or , More Detection Options
MEAS 2
menu. Enters the averaging factor (number) in
menu. Toggle to ON if you want to enable the
with an external source.
.
for more
for more
for more
ES User's Guide
for