HP 8712ES User Manual page 373

Preset All
User Kits
Preset
User Kit
Print Width
Print/Plot
HP-IB Addr
Softkey in the mod kit save/recall menu. Presets all of the User Cal
Kits to the type-N(f) calibration kit. This reduces the size of your saved
instrument state since user-defined calibration kits (Cal Kits A–J)
aren't included in the saved information.
See "Calibration Kits" on page 6-23
Access Keys:
CAL
Mod Kit SaveRecall
Softkey in the mod kit save/recall menu. Presets the selected User Cal
Kit to the type-N(f) calibration kit. This reduces the size of your saved
instrument state since the user-defined calibration kit isn't included in
the saved information.
See "Calibration Kits" on page 6-23
Access Keys:
CAL
Mod Kit SaveRecall
Softkey in the more printer menu. Sets print width (printing space) in
mm.
See "Connecting and Configuring Printers and Plotters" on page 4-68
for more information.
Access Keys: HARDCOPY
Softkey in the select copy port menu. Sets the recognized address of
HP-IB printers and plotters only. The default address is 5. The
"recognized HP-IB address" is the address that the network analyzer
uses to communicate with the device. The actual address of the device
must be set independently to match.
See "Connecting and Configuring Printers and Plotters" on page 4-68
for more information.
Access Keys:
HARDCOPY
ES User's Guide
for more information.
More Cal Cal Kit Modify (connector type)
for more information.
More Cal Cal Kit Modify (connector type)
Define Printer
Select Copy Port
Hardkey/Softkey Reference
More Printer
8-67
P